DataNet Wireless Data Acquisition System

The DataNet is a professional wireless data acquisition system using the Zigbee wireless protocol. Consisting of a USB base station, DataNet acquisition units, repeater units and the DataNet PC Suite logging software. The acquisition units have 4 inputs for direct measurement of PT-100, thermocouple, voltage 4-20mA, frequency and pulse. There is also a version with the addition of built-in temperature and humidity sensors.

Data can be stored in internal memory, or streamed to a central PC running the DataNet software for recording, charting and display. Data can be displayed in tabular or chart formats or the user can display a plant mimic with data overlaid. Logged data can be exported to a spreadsheet for further analyses. The software also enables you to configure, calibrate or update the firmware of DataNet units wirelessly.

http://www.audon.co.uk/datanet.html

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

TBox20 - Alarm and Control via your Mobile Phone

The TBox20 is a low cost solution to Remote Control and Monitoring via your mobile phone. The TBox20 can monitor 2 analogue and 4 digital switch inputs. A SMS alarm message can be sent when inputs exceed preset limits. The user can also interrogate the inputs through SMS messaging. The TBox20 also has 4 relay outputs which can be activated via SMS and used to switch lamps, pumps, heaters etc

The Tbox20 is an advanced yet simplified Remote Terminal Unit. Taking advantage of the reliable, widespread GSM networks and the supported GPRS service, Tbox20 becomes a remotely accessible unit from any part of the world. Using an embedded feature rich web server interface, you can configure various parameters of Tbox20. The inputs present on Tbox20 can be used for monitoring of external devices or connecting sensors (analog/digital). Alarm conditions can be configured for monitoring of these inputs. Since Tbox20 supports SMS and SMTP protocols, the device can be configured to send SMS/Email whenever alarm conditions occur. Tbox20 also gives you the freedom to control the states of the connected outputs.

Available ex-stock £149 ex VAT and delivery

http://www.audon.co.uk/tbox20.html

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: sales@audon.co.uk
web: www.audon.co.uk

ARMWeb Web Server Controller Board programmed in BASIC

The ARMweb from Audon Electronics is an ARM-7 based development board with an on-board Ethernet port and built-in web-server. Perfect for small web-based applications that require user customisation. Featuring 31 TTL compatible digital I/O's, 6 analogue inputs, 6 PWM outputs, an optional USB port and an easy-to-use web interface. The ARMweb has an easy-to-learn built-in BASIC compiler so you can be up and running in no time. Users can create and upload their own web pages and interact with the program code all using a web browser.

Available as board only or as an evaluation kit.

http://www.audon.co.uk/armweb.html

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: sales@audon.co.uk
web: www.audon.co.uk

Control any GPIB Instrument over Ethernet

The GPIB-LAN controller from Audon Electronics converts any computer with a Ethernet port into a GPIB Controller or Device. In Controller mode, the GPIB-LAN controller can remotely control GPIB enabled instruments such as Oscilloscopes, Logic Analyzers, and Spectrum Analyzers. In Device mode, the GPIB-LAN controller converts the computer into a GPIB peripheral for downloading data and screen plots from the instrument front panel. In both modes, the GPIB-LAN controller interprets high level commands received from the host computer and performs the appropriate low-level GPIB protocol handshaking.

No special drivers are required and a wide variety of host software may be used to communicate with the GPIB-LAN. The GPIB-LAN controller supports static IP address and dynamic (DHCP) IP address. The controller’s network parameters can be configured using the supplied NetFinder application

Available ex-stock from only £149.

www.audon.co.uk/gpiblan.html.

Vortex Low Cost Wind Speed Sensor

The VORTEX anemometer available from Audon Electronics is a rugged rotating cup-style wind sensor which can handle speeds from 5 to over 125 mph. The Vortex anemometer has a reed switch based volt-free contact closure output, producing one pulse per rotation, with a scaling of 2.5mph per pulse per second. This simple interface allows for easy connection to PC based data acquisition systems and stand alone dataloggers.

It comes with 8m of exterior grade cable which can be easily extended and an aluminium mounting bracket. Available as sensor only or sensor plus battery powered LCD display which gives readings in both mph or km/h.

The VORTEX wind sensor is great for do-it-yourself projects, marine applications, home weather station and wind power turbine location analysis applications.

Price is only £39 ex VAT.

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: sales@audon.co.uk
web: www.audon.co.uk

eDAM-9000 enables Modbus control over Ethernet

Available from Audon Electronics is the EDAM-9000 range of low-cost Ethernet based industrial data acquisition and control RTU devices. The EDAM-9000 range is based on common 10/100 Ethernet networking standards and supports the popular Modus/TCP protocol. The EDAM-9000 also supports UDP protocol over Ethernet networking.

There are 6 models in the range covering voltage, thermocouple and PRT analogue inputs, digital inputs, pulse counting and transistor outputs. All have a wide 10-30VDC power supply range, full opto-isolation and are housed in robust DIN rail mount enclosures.

Users can easily add EDAM-9000 I/O modules to existing Ethernet networks or use EDAM-9000 modules in new or existing SCADA systems. Prices start from just £99 ex VAT.

http://www.audon.co.uk/edam9000.html

USB DAQ Unit Samples all Channel Simultaneously

The RedLab-1608FS is a low cost 8 channel, 16-bit 50kHz data acquisition unit featuring simultaneous sampling on all input channels. The RedLab-1608FS is ideal for applications that require higher sampling rates per channel such as transient signal analysis or simultaneous acquisition of data for phase sensitive applications.

The RedLab 1608FS offers true simultaneous sampling of up to eight channels of 16-bit single-ended analogue input. This is accomplished through the use of one A/D converter per channel. The range of each channel is independently configurable via software. Eight digital IO lines are independently selectable as input or output.

Multiple-channel continuous sampling rates up to 100 kilosamples/sec total, where the maximum sampling rate per channel is 50 kilosamples/second (2 channels can be sampled at 50 kS/s, 3 channels at 33.3 kS/s, 4 channels at 25 kS/s etc.). A burst mode is also provided that allows 4 channels to be sampled at 50 kS/s each for up to 32,768 total samples. Input ranges of ±10V, ±5V, ±2V and ±1 volt are software selectable and each channel may be set at any of the four ranges independent of other channels.

A SYNC (synchronization) control line allows you to synchronize two RedLab 1608FS modules together to acquire data synchronously from 16 analogue inputs.

A 32-bit counter is capable of counting TTL pulses. The RedLab 1608FS is powered by the +5 volt USB supply from your computer. No external power is required.

Supplied with free chart recording software, and drivers for most DAQ packages and programming languages.

--
Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

PDS7102 100MHz 500MSPS Digital Oscilloscope

The PDS7102 is a full-featured 100MHz two-channel bench-top oscilloscope with 8bit resolution, perfect for any Engineer’s or Technicians desk. With a large 7.8" 640 x 480 colour LCD, the PDS7102 is small enough and light enough to carry anywhere. With a buffer size of 6K samples, PDS7102 sampling range is 500MSPS with synchronous 8-bit sampling on both channels. Sensitivity range is 5mV/div~5V/div. The USB connection makes printing stored results easy.

The PDS7102 can automatically measure and display frequency and peak-peak/ rms/mean values, and cursors can be moved to make individual readings. A built-in self-calibration facility improves measurement accuracy. Video monitoring is also possible with triggering on NTSC/PAL/SECAM line or field waveforms.

The PDS7102 can store up to 4 waveforms for comparison with live inputs. A persistence control is available too which simulates old analogue scopes, to compare slow-moving waveforms with previous scans. X-Y display allows you to see phase changes. A+B and A-B maths capability is also included.

Accessories provided with the PDS6062 include two x1/x10 passive oscilloscope probes, CD manual, PC download software, mains power cable and a USB cable.

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

DAQFactory Starter Data Acquisition software

Available from Audon Electronics is a new cut-down version of the popular DAQFactory data acquisition and control package called DAQFactory Starter.

DAQFactory Starter offers all the basic features of an HMI / SCADA software tool including data acquisition from a wide range of devices (limited to 16 I/O points), data logging to ASCII and binary files, three user definable screens with 44 screen components, powerful graphing and trending, plus Email and FTP out.

If you have a small application with less then 16 I/O points and don't need any of the advanced features of a full SCADA package, then DAQFactory Starter is probably just right for you. Plus, if your system grows, you can always upgrade. DAQFactory Starter is only £29.

http://www.audon.co.uk/daqfactory.html

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

Lowest Cost Ethernet to Serial Converters

The eNET range of Ethernet to Serial converts, available from Audon Electronics, are a simple way of connecting any serial device, whether RS232 or RS485 to a Ethernet network. They feature a simple setup procedure, ease of operation and automatic network recovery. Supplied with Programming examples and Virtual Serial Port software, to seamlessly add serial ports to your Network.

There are presently 4 models in the range. The eNET-100 is the budget level model with a single RS232 or RS422/485 port. Housed in a robust plastic enclosure with mounting tabs, the eNET-100 is ideal for cost-sensitive applications. Next is the eNET-132. This has 2 serial ports, 1 x RS232 and 1 x RS42/485. The eNET-132 is housed in a robust metal enclosure and is suitable for industrial applications. A 6 port version is available in the form of the eNET-432; this has 4 x RS232 port and 2 x RS422/485 ports.

Finally, the eNET-132W is a wireless WiFi version of the eNET-100. This unit supports IEEE 802.11b/g, uses spread Spectrum Technology with full WEP 64-bit/128-bit data encryption and has a maximum transmission Rate of 54 Mbps. Prices start from just £65

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

CuWin 3500 WinCE Touch Controller

Available from Audon Electronics, the CUWIN 3500 combines a 7" Colour graphic display and touch interface with a high efficiency industrial controller.

The CUWIN 3500 is a panel mount embedded controller with a 800 x 480 pixel, 260K colour graphics LCD touch screen and fast ARM9 32bit 266MHz processor. At the rear are RS232 and RS485 serial ports. The unit has one USB Host port for peripherals and one USB Device port to connect to a desktop for device access over ActiveSync. A standard Ethernet port is also provided. A SD card slot is available which can be used for application or data storage. The CUWIN 3500 contains a built-in speaker for mono sound and has a stereo audio jack.

The CUWIN 3500 is equipped with Windows CE 5.0 Embedded. Windows CE supports applications developed in Microsoft Visual Studio to create Windows CE ARM executables. Also supports the .NET Compact Framework which reduces development time by allowing the use of .NET functions.

Available ex-stock for £369 ex VAT and delivery.

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

RedLab-TC USB Thermocouple DAQ device at a Red Hot price!

Available from Audon Electronics is the RedLab-TC, a new, low-cost USB based thermocouple data acquisition unit. The RedLab-TC provides eight temperature inputs, 8 bits of digital I/O, 500 V of isolation, and built-in ambient temperature sensing, for only £239. Supplied with free chart recording software, and drivers for most DAQ packages and programming languages.

The RedLab-TC has 8 fully differential 24-bit thermocouple inputs which support all of the common thermocouple types (J, K, R, S, T, N, E, B). The RedLab-TC performs all linearization and cold-junction compensation to yield a typical accuracy of better than ±0.5°C. Opto-siolation ensures wiring faults won't cause damage to your system. The 8 digital I/O can be used for simple control, alarm outputs or for monitoring contact inputs.

The RedLab-TC is supplied with TracerDAQ, a simple chart recorder and datalogger package, and is supplied with drivers for common DAQ Packages such as LabVIEW, RealView and ProfiLab-Expert.

The RedLab-TC’s combination of competitive performance, superior ease-of-use, and lowest cost make it the perfect alternative to the thermocouple-based temperature measurement products available on the market today.

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

PLC runs BASIC and Ladder

The CUSB range from Audon Electronics are low-cost open-frame PLCs based on the CuBloc core processor running both BASIC and Ladder-logic programs.

There are 3 models in the range, CUSB-22R, CUSB-30R and the CUSB36R. These DIN-rail mount PLC's have a different mix of I/O, but all have mains relay outputs, opto-inputs, analogue inputs, PWM outputs, counter/timers, simple connections to a LCD and keypad and two RS232 ports. These can be easily reconverted for RS485 multi-drop use and the CUSB can be programmed for use as both MODBUS master or slave.

The CUSB PLCs use the FREE CublocStudio application for program development. With CuBlocStudio you can write your BASIC and/or Ladder programs, simulate and de-bug and download to the CUSB PLC. CuBlocStudio has Ladder logic monitor and Time Chart tools to help with debugging.

The CUSB PLC can handle a wide variety of small to big applications while using only a fraction of the space of a full-size controller at a fraction of the price.

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

Low Cost Wireless temp/Humidity Logging

The TL Series is a wireless temperature and humidity logging system based on a USB based receiver base station and up to 50 remotely located transmitters. The TL series is suitable for a wide range of uses in both industrial and domestic applications. Over fifty wireless sensors can be installed and monitored by the USB base station and the included temperature logger software enables the monitoring and analysis of all the sensors separately.

The TL-300 is the entry level receiver whilst the TL-500 has stand alone data logging capability with 2Meg of built-in memory. There are several wireless sensors in the range covering indoor and outdoor temperature and humidity. The sensor range will be expended over time, with a CO2 sensor due out next. The sensors can be located up to 40m from the receiver and use the licence exempt 433Mhz radio band.

The easy to use Software presents the temperature measurements with time and date graphically. The Software keeps track of the data over several years and will log data (in the background) as long as your computer is running.

The logged measurements can be exported in several formats for further processing. The package includes a screensaver that dynamically displays the actual temperature for each sensor. An additional feature, when the software is installed, is Messenger software that enables temperature messages to be sent by email and to be published on a website. With an email-to-SMS service it is therefore possible to receive information from the temperature logger system on an SMS enabled device.

Available as starter kits which include either the TL-300 or TL-500 receiver, 2 wireless sensors, USB lead and software CD. Prices start from £56 ex VAT and delivery.

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: info@audon.co.uk
web: www.audon.co.uk

Fast USB DAQ Unit for Dynamic Applications

New from Audon Electronics is the USB-AD16F high speed USB based multifunction I/O unit with 16 opto-isolated analogue inputs, 2 analogue output, 4 digital inputs and 4 digital outputs. Data can be acquired at up to 250kHz rate at 16-bit resolution. A range of analogue and digital expansion boards are also available. Supplied with a free copy of NextView4-Live software for data acquisition and control and a wide selection of Windows, MAC and Linux programming examples.

The USB-AD16f features 16-channel 16-bit analogue inputs with 4 programmable input ranges of ±10V, ±5V, ±2V, ±1V. With 250kHz sampling rate the USB-AD16f is perfectly suitable for dynamic applications such as noise and vibration measurements and impact testing. The galvanic isolation of the analogue inputs protects the measurement system and PC from accidents!

The 2 isolated analogue outputs are also at 16-bit resolution with a ±10V output range. For controlling and recording digital states 4 digital inputs and outputs each are available. An additional counter input allows pulse measurements.

All I/O are presented via two 37-way D-type sockets, one analogue and one digital. The user can connect to this directly or optional expansion boards are available. Also compatible with the MAL series of signal conditioning modules for connection of thermocouples, strain gauges etc. For use with USB 1.1 and 2.0 systems, up to 127 units can be connected to a single PC.

Drivers are available for Windows, MAC and Linux operating systems. The USB-AD16f is supplied with an Active-X component and comprehensive programming examples for use with most common programming languages. There are also VI for use with LabVIEW and there is a USB-AD16f component ion the ProfiLab programming package.

The USB-AD16f is also supplied with a copy of nextView4-Live data acquisition and control software. With NextView-Live, the user can acquire and analyse data, set analogue and digital outputs and read the status of the digital inputs. The user can create their own screens, with chart displays, text, alarm panels, output sliders etc.

The USB-AD - Where's the DAQ Unit?

Available from Audon Electronics is the USB-AD USB based multifunction I/O unit which is so small it could be mistaken for a connector. The USB-AD has 16 analogue inputs, 1 analogue output, 4 digital inputs and 4 digital outputs all enclosed in a standard 37-way D-type connector housing. Supplied with a copy of NextView4-Live software for data acquisition and control and a wide selection of Windows, MAC and Linux programming examples.

The USB-AD is a low cost USB based multifunction I/O unit with 16 x ±5V 12-bit analogue inputs, 1 x ±5V 12-bit analogue output, 4 digital inputs and 4 digital outputs. Data can be acquired at up to 500Hz rate at 12-bit resolution. All I/O are presented to a 37-way D-type socket. The user can connect to this directly or optional expansion boards are available. Up to 127 units can be connected to a single PC.

Drivers are available for Windows, MAC and Linux operating systems. The USB-AD is supplied with an Active-X component and comprehensive programming examples for use with most common programming languages. There are also VI for use with LabVIEW and there is a USB-AD component icon the ProfiLab-Expert programming package.

The USB-AD is also supplied with a copy of nextView4-Live data acquisition and control software. With NextView-Live, the user can acquire and analyse data, set analogue and digital outputs and read the status of the digital inputs. The user can create their own screens, with chart displays, text, alarm panels, output sliders etc.

The USB-AD is available ex-stock for £79 (ex VAT and Delivery)