NETIO-230C Web Based 4-Ch Mains Switch with PING Reboot

The NETIO-230C is a Ethernet/Web based 4-Channel mains switch unit which can automatically re-boot up to 4 devices when a ping request fails. 

The NETIO-230C can be controlled over a network using any web-browser, by telnet or CGI commands. Each independent outlet can be switched ON, OFF or Booted (OFF- delay-ON) or a built-in timer can provide scheduled on/off control. Android and IOS Apps also available.

The NETIO-230C also has a "watchdog" function whereby a power outlet can be toggled off and on following a failure of the associated Ethernet device failing to respond to a PING request. This can be used to automatically reboot a device that has locked-up and is failing to respond. The NETIO-230Cc can then send an email report to let you know a reboot has occurred.

 

For developers, the NETIO-230C allows integration into larger systems using  the RS-232 interface or by CGI commands sent over the LAN.

More information at http://www.audon.co.uk/rs232relay/NETIO-230C.html

.

TME - Ethernet Thermometer Alarm Unit

TME is a simple temperature sensor with Ethernet interface. It measures temperatures ranging from -55°C to +125°C. Measured values can be read in several ways including TCP, UDP, HTTP (WEB), e-mail, SOAP, Modbus TCP and SNMP protocols. Thanks to this it is possible to choose a method suitable for particular application.

The temperature is sent in a simple ASCII format directly in degrees Celsius; there is no need of any additional conversion. It also enables communication with SNMP protocol (UDP) or sending an e-mail in case any of the pre-set limits is exceeded.

You can easily embed the temperature from TME to your WEB site using http GET. Measured temperature is also available in XML file or it can be sent as an http POST in XML format for further processing in a WEB service. (All temperature acquisition methods are on page 6.)

TME is configurable via WEB interface. TME is powered from an external PSU 5V (TME) or directly from ethernet network according to IEEE802.3af standard (TME PoE)

http://www.audon.co.uk/tme.html

Economical Ethernet Temperature/Humidity email Alarm

The HWg-STE web thermometer is an Ethernet based two channel alarm unit configured using a built-in web server. The HWg-STE web thermometer is configured using a built-in web server which can also show the current temperature (and humidity). If the temperature (or humidity) exceeds a specified threshold, an e-mail alert is sent. The HWg-STE Thermometer is also fully SNMP compatible. Free windows software HWg-PDMS for datalogging, graphical overview and MS Excel export is included.

The HWg STE represents an effective and economic solutions in the applications like air-conditioning failure, heating system monitoring, cooler/freezer monitoring, heating optimization and food storage.

http://www.audon.co.uk/ste.html

Temperature Alarm and Monitor from Web Browser

The P8 series from Audon Electronics a low-cost Ethernet solution for temperature monitoring and alarm in server room, museum, medical and industrial applications. Simply connect to your LAN, open any web browser and begin monitoring.

Temperatures can be viewed in tabular or history chart formats. The history memory can hold 900 readings, with a variable store rate from 10 seconds to 18 hours. Stored history data can be downloaded to a PC file for further analysis.

The P8 series also have under and over temperature alarms. The units can email a warning message to up to three users, and can send SNMP alarm traps. The series also supports MODBUS TCP for integration with SCADA software. LabVIEW examples are available.

http://www.audon.co.uk/p8.html

ARMWeb Web Server Controller Board programmed in BASIC

The ARMweb from Audon Electronics is an ARM-7 based development board with an on-board Ethernet port and built-in web-server. Perfect for small web-based applications that require user customisation. Featuring 31 TTL compatible digital I/O's, 6 analogue inputs, 6 PWM outputs, an optional USB port and an easy-to-use web interface. The ARMweb has an easy-to-learn built-in BASIC compiler so you can be up and running in no time. Users can create and upload their own web pages and interact with the program code all using a web browser.

Available as board only or as an evaluation kit.

http://www.audon.co.uk/armweb.html

Audon Electronics
Phone: +44 (0)115 925 8412
Fax: +44 (0)115 925 9757
email: sales@audon.co.uk
web: www.audon.co.uk