NETIO-230C Web Based 4-Ch Mains Switch with PING Reboot

The NETIO-230C is a Ethernet/Web based 4-Channel mains switch unit which can automatically re-boot up to 4 devices when a ping request fails. 

The NETIO-230C can be controlled over a network using any web-browser, by telnet or CGI commands. Each independent outlet can be switched ON, OFF or Booted (OFF- delay-ON) or a built-in timer can provide scheduled on/off control. Android and IOS Apps also available.

The NETIO-230C also has a "watchdog" function whereby a power outlet can be toggled off and on following a failure of the associated Ethernet device failing to respond to a PING request. This can be used to automatically reboot a device that has locked-up and is failing to respond. The NETIO-230Cc can then send an email report to let you know a reboot has occurred.

 

For developers, the NETIO-230C allows integration into larger systems using  the RS-232 interface or by CGI commands sent over the LAN.

More information at http://www.audon.co.uk/rs232relay/NETIO-230C.html

.

New 1-wire sensors for the Audon Electronics TCW240 Ethernet Control Unit

A new range of 1-wire based sensor interfaces have been introduced for use with the TCW240B Ethernet control unit.

The TCW240B is an Ethernet based multi-functional alarm and control unit with built-in web server. It includes 4 digital inputs, 4 analogue inputs and a 1-wire interface for up to 8 external sensors.
It also has 4 relay outputs with normally open and normally closed contacts. The relays can be activated remotely from the web interface or from software using SNMP, XML and HTTP API commands. The relays can also be automatically activated from the status of a monitored input, such as a temperature, exceeding a set limit. A relay can only be assigned to a single input, but every input can initiate a alert e-mail or SNMP trap on alarm.

The TCW240B also has a real time clock, so scheduled tasks can be programmed in either single or with a continual daily/weekly basis.

 Three new 1-wire interface modules have now been introduced in addition to the existing temperature and humidity sensors: the TCS200 is an current module for both AC and DC currents up to 15A, the TSV200 is a voltage module with a 60V input range and the TSA200 is a 4-20mA current loop interface. All modules feature galvanic isolation and dual RJ11 connectors for easy daisy chaining on the 1-wire bus.

The large number of digital and analogue inputs, the 1-wire sensor bus and relay outputs makes TCW240B a good choice for various application such as home and office automation and alarm systems, greenhouse and agricultural control, industrial process control, IT system monitoring and critical fridge/freezer monitoring and alarm.

More information at http://www.audon.co.uk/ethernetrelay/TCW240B.html

QMBox - You choose your Data Acquisition IO mix

New from Audon Electronics, the USB based QMBox series devices consist of one or more data acquisition modules installed in a single case. These can be modules of ADC, DAC, digital I/O, relay switching, etc. Modules in one device can have any configuration, therefore a suitable QMBox device can be selected for practically any task of measurement and control automation.
You need a device that allows you to:

• measure and record temperature
• turn on and off the heating installation
• interrogate the state of power switches

Each QMBox device may contain from one to eight multi-channel cards - choose the case that suits the number of channels you need;

 

Software
The QMLab software suite is a universal software tool for working with QMBox devices. It allows performing most standard tasks within measurement automation.
The QMLab suite includes:

• data recorder
• oscilloscope
• spectrum analyzer
• generator of analogue signals
• primary data processing unit

Primary data processing may include calibration, averaging, normalization in accordance with IEC for a specific type of sensor, as well as a more complex mathematical processing. For example, for thermocouples there is an automatic software compensation of cold junction and linearization of the transfer parameter.
Obtained data is saved in standard text and binary formats suitable for conventional and specialized data processing programs (Excel, MathLAB, Cool Edit pro, etc.).
The generator of analogue signals, included in QMLab software suite, supports all QMBox series DAC devices. The program allows you to use the DAC as a multichannel generator of sinusoidal signals, DC signals, as well as signals of arbitrary waveforms (by “playing” through the DAC user’s binary files of arbitrary length).
QMLab software suite is free of charge and it is supplied with all our devices.

Software development kit (SDK package)

Apart from the complete QMLab software suite, the QMBox delivery set includes an SDK package. It consists of software and documentation designed for users who would like to create their own applications for working with QMBox devices. SDK software consists of function libraries (API) and examples of software development.
The user has a possibility to create full-blown applications using just a limited number of library functions. These library functions are written so that even an inexperienced programmer who is not well-versed in multithreaded and object-oriented programming can work with QMBox devices.
For more information see http://www.audon.co.uk/usb_qmbox.html

iDAQ Wi-Fi Dataloggers to feature in the 2012 IET Innovation Awards

Now available from Audon Electronics is the new iDAQ range of Wi-Fi enabled dataloggers which are shortly to be featured in the 2012 IET Innovation Awards. The iDAQ range comprises Voltage input, 4-20mA input, PT100 thermometer input and a combination voltage and pulse counter input units in both 4 and 8 channel versions.

The iDAQ range offers high resolution, high accuracy readings and are compatible with a wide range of  analogue and digital sensors. iDAQ units have Wi-Fi connectivity and incorporate a built-in web-server so no PC application software is required. Readings can be viewed in real time in tabular or chart recorder format using any tablet, PC or mobile device via a web browser. Readings can also be logged in the internal 256kb memory for download at a later date. Log rates from once every 5 seconds to every 24 hours can be set.

iDAQ can also be configured to issue email alert messages on alarm; for example, an alert could be issued if a water pipe temperature falls below a critical set-point (i.e. to prevent burst pipes etc). Another use for this alert feature is to monitor window and door contacts; an alert could be issued if they open.

The USB2.0 interface allows the user to write their own applications to control the unit or to take measurements. It also allows them to configure the unit using any third party terminal software

Application areas include:


* Smart metering (electricity, gas and water)
* Eco-home monitoring (central heating, humidity control, PV output, etc)
* Environmental monitoring
* Weather stations (iDAQ can provide live and historical weather trends)
* Industrial temperature monitoring (supports platinum resistance temperature sensors)

http://www.audon.co.uk/wifi_daq.html

World’s First iPhone™- based Mixed Signal Oscilloscope

Audon Electronics is now offering the iMSO-104 - the world's first mixed-signal oscilloscope that moves Apple's ubiquitous iOS devices and touch-screen interface into the test and measurement world. iMSO-104 is a revolutionary new 5MHz oscilloscope adapter for iPod touch, iPhone and iPad that is intuitive and easy to use, making it an ideal solution for field service, sales and application engineers, as well as students and hobbyists.

iMSO-104 is designed with a 5MHz bandwidth front-end and a 12MSa/s sample rate, simultaneously analyzing one analog and four digital signals for versatile, time-synchronized troubleshooting. All the usual input, trigger and math features you would expect from a high quality scope are incorporated, including cursor measurements, variable persistence, built-in 3.3V 1kHz reference signal and more. iMSO-104 also adds novel features such as computation power and instant emailing of screen captures. In addition, simple measurements of frequency, period, duty cycle, and reference signal capture are just a touch away. Timebase range is from 2uS – 1S/div, with input voltage display from 50mV – 2V/div. Maximum input voltage using a 10x probe is 40V.

iMSO-104 is based on Cypress Semiconductor’s PSoC 3, a low power, system-on-a-chip mixed-signal IC, which handles Apple's proprietary dock interface for iOS devices while simultaneously processing incoming analog and digital signals. The result is a handy intuitive scope system that is both affordable and extremely portable. Intuitive finger movements are used to adjust trigger level, zooming, or repositioning channel displays. Captured signal screenshots can be rapidly sent as a time-saving email image for rapid reporting, Sent via other freely available Apps, current location and time can be included in the email with a link to Google Maps for uniquely logging on-the-job signal information.

Software for running iMSO-104 - including a demo package that does not require the actual iMSO-104 device - is available free at Apple™’s AppStore, and is available in English, French, German, Italian, and Spanish. iMSO-104 is compatible with all generations of iPod touch, iPhone, and iPad devices running iOS version 3.1.3 or higher. Setups can be customized and accessed quickly - ideal for on-the-go technicians. With these advanced features and Apple's intuitive multi-touch user interface and brilliant, high-resolution displays, iMSO-104 delivers the easiest, most intuitive scope solution on the market.

More Information: http://www.audon.co.uk/handscopes/imso104.html

New Owon SDS Range of Scopes

SDS6062 - a new, two-channel bench-top scope with a huge 10MSa record length for each channel, allowing zooming capability for investigating fast, intermittent pulses.

This low-cost versatile scope samples at 500MSa/s and is packed with useful features normally only seen on higher-end DSOs, including deep memory, external, video-capable trigger, auto-measurements, auto-scaling, large 8" full colour LCD display, XY mode, auto-set, averaging, math functions, USB output, waveform storage, pass/fail output and a 3-year warranty. Even FFT functionality is included for frequency spectrum display. comes in a sleek, slim case and can even be fitted with an optional battery, ideal for field or isolated operation.

The SDS6062 comes in a sleek, slim case and can even be fitted with an optional battery, ideal for field or isolated operation.

• Autoscale can automatically adjust the vertical gain, or the horizontal time base, or both together. This is useful for circuit probing -- as the probe is moved from point to point on a circuit board, the display auto-adjusts for best trace presentation. It functions in the same manner as 'AutoSet', but instead of being a one-time function, it's active until turned off, keeping “hands-free.”
• FFT allows instant display the frequency spectrum of the signal under test.

The SDS6062 can automatically measure and display frequency and peak-peak/rms/mean values, but cursors can also be moved to make individual readings. A built-in self-calibration facility improves measurement accuracy. Video monitoring is also possible since you can trigger on NTSC/PAL/SECAM line or field waveforms. SDS6062 features include: manual cursor measurements, up to 19 automatic measurements (including frequency), high-speed screen update, storage for up to 15 waveforms and set-up parameters, convenient USB serial interface with PC software, 400V (DC+AV peak) maximum input, optional rechargeable battery pack and multi-language capabilities.

This lightweight scope is perfect for any engineer’s or student’s desk. The USB master and slave connections make printing or storing results easy too. With a large 7.8” 640 x 480 color TFT-LCD, this scope is small enough and light enough to carry anywhere, weighing under 4 lbs. Sensitivity range is 2mV/div to 10V/div with maximum display of ±50V. Another really useful feature is the ability to store up to 15 waveforms for comparison with live inputs. A persistence control is available too which simulates old analog scopes to compare slow-moving waveforms with previous scans. ‘A+B’ and ‘A-B’ math capability is included, while the X-Y display feature can be used to reveal phase delays.

More information at http://www.audon.co.uk/benchscopes/sds6062.html

H0530 Ethernet thermometer alarm with relay outputs

The H0530 is a low-cost Ethernet solution for Temperature monitoring and alarm in server room, data centre, museum, medical and industrial environment monitoring applications. Featuring a built-in temperature sensor with a -30°C to 80°C range, 3 digital inputs for use with PIR or flood detection devices, 2 alarm relay outputs, LCD for local display, email and SNMP under/over temperature/humidity alarm, a built-in webserver for real time temperature display and history chart and MODBUS protocol for SCADA compatibility.

http://www.audon.co.uk/h4531.html

GL220 Chart Recorder/ Data Logger

The GL220 is the next generation midi logger following on from the success of the GL200 & GL200A models. With 10 fully isolated multi-function inputs and internal 3.5MB of non-volatile flash memory, this logger has an exceptional cost to performance ratio. With its large format colour display, you can easily set up and capture data with the ability to monitor waveforms and digital values during measurements. Its instant replay function makes it easy to review data that has been captured to internal memory or removable USB memory stick storage. Standard PC interface makes GL220 accessible through USB.

http://www.audon.co.uk/gl220.html

TME - Ethernet Thermometer Alarm Unit

TME is a simple temperature sensor with Ethernet interface. It measures temperatures ranging from -55°C to +125°C. Measured values can be read in several ways including TCP, UDP, HTTP (WEB), e-mail, SOAP, Modbus TCP and SNMP protocols. Thanks to this it is possible to choose a method suitable for particular application.

The temperature is sent in a simple ASCII format directly in degrees Celsius; there is no need of any additional conversion. It also enables communication with SNMP protocol (UDP) or sending an e-mail in case any of the pre-set limits is exceeded.

You can easily embed the temperature from TME to your WEB site using http GET. Measured temperature is also available in XML file or it can be sent as an http POST in XML format for further processing in a WEB service. (All temperature acquisition methods are on page 6.)

TME is configurable via WEB interface. TME is powered from an external PSU 5V (TME) or directly from ethernet network according to IEEE802.3af standard (TME PoE)

http://www.audon.co.uk/tme.html

Replace your Relay Logic with low-cost mini PLC

The xLogic SuperRelay is a compact and expandable CPU replacing mini PLCs, multiple timers, relays and counters. The xLogic SuperRelay perfectly fits in the space between timing relays and a low-end PLC's. The ELC-18 range is the advanced level model, incorporating a good mix of digital and analogue I/O, clock with calender, counters, timers, LCD, keypad and an expansion port. Easy to configure either using the LCD and keypad or with drag-and-drop functions blocks using the FREE ELCSoft software.

xLogic SuperRelay is a compact and expandable industrial computer ideal for replacing older PLCs, multiple timers, counters and traditional relay logic.

The xLogic SuperRelay is available in 120V/240V AC or 24V DC versions, making it the ideal solution for relay replacement, or simple control applications as building and parking lot lighting, managing automatic lighting, access control, watering systems, pump control, ventilation systems, home automation and a wide field of other applications demanding low cost to be a primary design issue.

Available with a common mix of digital input, digital output, analogue input, PWM output, high speed pulse counting, Real time clock and time switch functions. The ELC-18 range offer a 4-line LCD display and keypad for program modification and display and control whilst the program is running. An expansion port allows the connection of up to 31 expansion modules, extending the I/O channel count and adding Ethernet and SMS text communication capabilities.

http://www.audon.co.uk/elc18.html

Low Cost Ethernet to Serial Converter

The eNET-232 Ethernet to Serial converter is a simple way of connecting any serial device, whether RS232 or RS485 to a Ethernet network. It features a simple setup procedure, ease of operation and automatic network recovery. Supplied with Programming examples and Virtual Serial Port software, to seamlessly add serial ports to your Network. The eNET-232 has a two serial ports, one RS232 and the other can be a RS232/422/485 RS485 port.

A pair of eNET-232's can be set up in Client-Server mode where they will send RS232 data between each other without any PC intervention.

http://www.audon.co.uk/data_comms.html

MODBUS Temperature, humidity and Barometric Pressure Transmitters

Available from Audon Electronics are a range of low cost temperature, humidity and barometric pressure sensors with an RS485 output. These units can communicate via a simple ASCII "Adam 4000 series" compatible protocol or the industry standard MODBUS RTU protocol for use with common SCADA software.

Measured temperature, relative humidity, barometric pressure are converted to serial output with a RS485 interface. Transmitters are available in wall-mount, duct-mount and bar types. Also, types with T+RH probe on a cable are available.

They featuring a large dual line LCD for local display of temperature, humidity, pressure or other calculated value and the microprocessor design ensures maximum long term stability and fail indication.

The transmitter works with ModBus RTU communication protocol or with ADAM compatible ASCII protocol. The protocol is user selectable in special configuration mode by means of the PC.

http://www.audon.co.uk/temp485.html

Economical Ethernet Temperature/Humidity email Alarm

The HWg-STE web thermometer is an Ethernet based two channel alarm unit configured using a built-in web server. The HWg-STE web thermometer is configured using a built-in web server which can also show the current temperature (and humidity). If the temperature (or humidity) exceeds a specified threshold, an e-mail alert is sent. The HWg-STE Thermometer is also fully SNMP compatible. Free windows software HWg-PDMS for datalogging, graphical overview and MS Excel export is included.

The HWg STE represents an effective and economic solutions in the applications like air-conditioning failure, heating system monitoring, cooler/freezer monitoring, heating optimization and food storage.

http://www.audon.co.uk/ste.html

Digital Event Recorder - Date and Time stamp 4 digital inputs

The S7841 is a 4-channel digital event recorder which can record the date and time when any of it's 4 inputs changes state. The inputs can be volt-free contacts, such as door contacts, machine switches, or it can be a voltage signal. Data can then be downloaded to a PC for storage and analysis. A LCD display shows the current sate of the logger.


The S7841 is a stand-alone device, and the replaceble internal battery typically lasts 4 years. Up to 16254 events can be recordered per input, and spikes of less than 1/2 second are ignored to prevent false results.

Data download is via a Rs232, USB or Ethernet connection.

More Information from http://www.audon.co.uk/s7841.html

DLP-IO20 - USB DAQ just got cheaper!

The DLP-IO20 Data-Acquisition Module from Audon Electronics is a low-cost, easy-to-use data-acquisition system for analyzing AC voltages, driving 5-volt relays, controlling and monitoring processes and measuring DC voltages in the range of 0-5 volts. This module provides topside wire terminal blocks for the wiring connections.

The 20 channels on the DLP-IO20 are broken down as follows: 3 outputs with high current relay/LED drivers and 17 digital I/O; 14 of which can be set to analog input mode. The DLP-IO20 also provides two latching relay contacts. Each of the channels and relay contacts can be controlled via simple, multi-byte commands. All operational power is taken from the host PC via the USB port.

The mode of each I/O is automatically changed with each command sent. For example, if an I/O is set to Digital Output-High and then the Digital Input Mode is selected, the I/O is first changed to Input Mode and then the high/low state is read and returned to the host.

http://www.audon.co.uk/io20.html

Internet Control and Monitoring Made Easy

The IO-204 Monitor & Control Module helps bridge the gap between the physical world and the World Wide Web. The IO-204 module and online tools allow you to easily get your projects on the web. There is no need to run a home web server or track ever changing dynamic IP addresses.

The IO-204 module takes care of the Internet connectivity and the user customizable widgets on the ioBridge website remove the need for complex programming. Just plug in your IO-204 module, register on the ioBridge website and within minutes, you’ll be interacting with lights, switches, servos and sensors. Keep your widgets private on your secure ioBridge dashboard or publish them on your website for the entire world to enjoy!

http://www.audon.co.uk/iobridge.html

DSO and Logic Analyser in One

The MSO7102 from Audon Electronics is a new, low-cost, full-featured two-channel bench top mixed-signal oscilloscope combined with a 16-channel logic analyser - perfect for any engineer or student’s desk.

With its 500MSPS 100MHz bandwidth, this instrument is perfect for design, testing and maintenance in the laboratory or workshop. Featuring a large high-resolution 8in colour LCD screen, advanced trigger functions, optional battery pack for portable applications and USB connectivity with free software. Available from stock for only £749 ex VAT

http://www.audon.co.uk/mso7102.html

IO-204 - Internet Control and Monitoring made Easy

The IO-204 Monitor & Control Module helps bridge the gap between the physical world and the World Wide Web. The IO-204 module and online tools allow you to easily get your projects on the web. There is no need to run a web server or track ever changing dynamic IP addresses.

The IO-204 module takes care of the Internet connectivity and the user customizable widgets on the ioBridge website remove the need for complex programming. Just plug in your IO-204 module, register on the ioBridge website and within minutes, you’ll be interacting with lights, switches, servos and sensors. Send email or Twitter Mail on alarm or digital state change, chart and log sensor data and download to a Spreadsheet compatible file.

Wide range of expansion boards available - servo control, temperature, relay, X10www.iobridge.co.uk

Handheld Temperature/Humidity Dataloggers

The D-Series available from Audon Electronics are a range of portable, battery operated stand-alone temperature, humidity and thermocouple data loggers. There are 3 models in the range; The D3120 has an internal temperature and humidity sensor with a -10°C to +60°C temperature range and a 5 to 95% relative Humidity range, the D3121 uses an external temperature and humidity sensor on a 1m lead with an -30°C to +105°C temperature range whilst the D0321 accepts up to 2 external type K, J, or S thermocouples.

Temperature and humidity readings can be displayed on the LCD screen and recorded in internal memory. An audible alarm can also be set to warn of alarm conditions.

Record rates can be set from once every 10 seconds to once every 24 hours, and up to 16000 recordings can be stored. Data can then be downloaded to a PC for display and analysis at a later date using the included software.

http://www.audon.co.uk/dlog.html

Temperature Alarm and Monitor from Web Browser

The P8 series from Audon Electronics a low-cost Ethernet solution for temperature monitoring and alarm in server room, museum, medical and industrial applications. Simply connect to your LAN, open any web browser and begin monitoring.

Temperatures can be viewed in tabular or history chart formats. The history memory can hold 900 readings, with a variable store rate from 10 seconds to 18 hours. Stored history data can be downloaded to a PC file for further analysis.

The P8 series also have under and over temperature alarms. The units can email a warning message to up to three users, and can send SNMP alarm traps. The series also supports MODBUS TCP for integration with SCADA software. LabVIEW examples are available.

http://www.audon.co.uk/p8.html